As one of few German producers, inventors and developers SKIN JET has been specialising in a very fine and complicated system for more than 10 years.
SKIN JET is seen as a pioneer with many technical achievements, especially concerning microdermabrasion and ultrasound.
Nowadays almost all countries world-wide are working according to the SKIN JET method developed by Mrs. Dr. med. K. Komender-Spira (then a method unique in the world):
Here we observe very big differences in the technical executions and unawareness concerning active substances adjusted to the technology and to the skin problems.
Because SKIN JET also develops and produces the offered preparation systems we can speak from practice and science in this case.
As the former owner of the company DAMA - Machine Factory in Darmstadt Dr. Ing. W. H. Spira values a precise and perfect technology with uncomplicated handling for the customer.
As specialists and experts in this field we will try to answer all your questions which will possibly be of help in seeing the big differences between the many devices on the market and therefore establishing your purchase decision.
Many articles, often written by people without technical knowledge and with the one-sided goal in mind to promote their own interest or also their own company, until today have not yet provided professionally relevant explanations.
- Price of devices
Professional devices of high quality with high power are normally more expensive than simple, weak and unprofessional devices with a low price but with a high and quick use of material and spare parts.
- Treatment results
The goal of microdermabrasion is the even removal of the upper skin layer, the stratum corneum. Only with the AR-SYSTEM with high device power like the one by SKIN JET is it possible to achieve a diameter and the removal of the treated area of 0,8 - 1,0 cm with the face treatment head in a split second.
Only this system can guarantee the even removal with just one movement of the hand piece head.
Many other devices only show an area of 0,2 - 0,4 cm maximum or hardly visible in the paper test, and that even with several movements of the head on the same spot. In addition, such a treatment result might be called a "fraying out effect" due to the building of a local vacuum system on the skin, but never an optimal, even removal.
The necessary depth of the treated area can only be achieved by a high power of the device.
Independent institutions test effectiveness
As one of only few companies world-wide SKIN JET gets many methods tested.
The SKIN JET ABRASIVE AR-SYSTEM has been very highly ranked in computer-aided laser profilometry and dermatological studies.
The quantitative assessment of the roughness of the skin surface has shown an improvement of 19,6% with some patients even after the first treatment.
- Crystals
With optimally constructed devices there are less disturbances caused by crystals.
The quality of the crystals but not their size is very important.
SKIN JET itself works on the crystals, therefore it is not necessary to install additional drying gadgets.
With the high power of the device other crystal prismates, compared to the elongated, razor-sharp form, are used. Only this can guarantee for the healthy course of treatment.
With most devices there are a lot of crystal remains on the skin. This not only means a high, unnecessary use of crystals but in addition also mechanical friction resp. harmful, negative reactions on the skin. The so-called "desert effect" indicates bad device quality.
For good, effective working you use crystals for ca. EUR 1,-- per 7 minutes of working.
With effective and optimal devices the course of treatment for the face has a duration time of 5 min. (in the case of a trained hand).
With good devices one size of crystal prismates is sufficient to achieve optimal results.
It is not necessary to change the size of the crystals per face or body part.
In any case the fine-grained and also the bigger crystals do not show any reactions with weak devices.
"Where there is no power, even different sizes of crystal prismates cannot help."
In the case of insufficient devices there often only occurs a strong feeling on the skin, caused by the blood flow enhancing measures of the vacuum system, but without any removal reaction.
Aluminium oxide crystals do not show allergic reactions, they are very hard and not as highly hygroscopic and soft as salt crystals.
The positive effect of aluminium oxide crystals is known world-wide.
- Spare parts
With good devices the use of spare parts should be very low during the first years.
Repeated changes of filters and tubes and a continuous cleaning process indicate either weak power, bad device quality or a high possibility for profit with the spare parts on the side of the seller.
Top part treatment heads made of good plastic can last for many years in the best condition with a continuous sterilisation process.
The opening of the heads will get bigger and then the heads will be used for scar treatment.
